Computer accessories tricks are ten cents (RGB LEDS?).But from time to time one becomes a distinctive feature of computing (again, anyone? ...).Marsback Zephyr Pro charges a fan inside it to keep your numbers dry and your fist during long play sessions.So, is the fan a way to circumvent?Or will it become a new feature in the ecosystem of gaming accessories?
I often start my evaluation with my disclosure.I am a normal player.I am not playing frequently and when I play, usually does not continue to play for a long time;Life is on its way.But I spend hours on the computer every day, and as much as I want to avoid the mouse for the keyboard, I still use it for a very large part of the day.Sometimes in an office with very few air.However, this is a review of an ordinary player and a productive user.
Zephyr Pro is interesting.It stands vertically and slides the top, which leads to the exposure of Zephyr Pro on a piece of foam similar to the statue..It is clear that the package is carefully designed to be striking, safe and preventive.In addition to the mouse, you receive a few papers of stickers, user guide and a card describing Marsback.
At first glance, the plastic from which Zephyr Pro made it a little cheap due to a slightly tight surface.The surface looks shiny and faded compared to Razer Deathadder Essential and Cooler Master Keys Lite.
What makes the feeling of licenses increases is that the relatively low mouse mass, again, is 15 grams less than other mice.Despite the strength of the cheap feeling and the lack of mass, it feels strong, and I personally do the best of lighter mice, but I assume that my limited time with mice with commercial names has been transferred to some biases..
The mouse body, contrary to what I saw before, has a hole around the back interface of the shell, along the sides, and a small amount at the base of the basic buttons.The mosaic style is identical and the holes themselves have edges that enjoy the edges.
The hole allows light to enter from the inside, where the transparent fan shines quietly.The same fan carries the Marsback logo adjacent to the medium "M" in addition to the "Arsback" print.It is clear that the hole was necessary for the fan, but the fan may be ugly for some, especially when it is illuminated because it is prominently visible between the dark interior of the mouse.
In addition to the fan, part of the PCB surface components can also be seen.PCB seems to stretch on the entire mouse base, or at least what is externally visible.Personally, I feel that visible surface installation ingredients look unpleasant.
Not because it is visible, but because I feel that there should have been an obligation to either hide the component or commit to showing it.This is somewhere between cheating on both aesthetics.
الماوس متوسط الحجم بالطول بدون قوس واضح كما فعل البعض، لكنني أشعر أنه أرق قليلاً من معظم طوله، لكن مرة أخرى، لست من عشاق الألعاب أو مستهلكي الألعاب.In any case, I found the shape of the mouse can be easily adapted and became very nice as a daily driver.
Zephyr Pro features back and forward buttons, which have become familiar in most computers, as well as a central button used to change DPI.There are two additional buttons under the mouse, one to enable and disable the fan and the other to enable and disable the lighting.
About the bottom of the mouse, there is a lighting channel for LED lights except for the front face where the cable feeds.Since it is often heading down, it is very difficult to see the channel until it is illuminated.This is especially true in low lighting and adds some complexity that is very attractive.
At the expense of repetition, I am just an accidental player, so my performance standards will be completely stories and subjective.But I really enjoy this mouse and make me feel comfortable from a human being.I like its light weight and its tight surface.But these are all very personal aspects.
Marsback Zephyr Pro uses the Pixart 3389 sensor that can 16,000 points per inch.That is, the accuracy that was scanned is 16,000 units per inch (why we still use the rusks for anything, I don't know).What really means is that you can move the mouse 1/16000 of the inch (0.0015875 mm) This movement will be discovered, provided that you have a DPI on 16000.
The highest DPI setting is allowed more quickly, but it can sometimes affect accuracy due to the user's mistake, and for this reason, it becomes a personal preference..However, you can increase DPI and reduce the mouse speed in your operating system to increase allergies without usually treated with high DPI modes.
Pixart 3389 polling rate is 12,000 Hz.This is the frequency that the sensor picks up, and is usually referred to as FPS, or tires per second, but it should not be confused with the investigation rate that the mouse sends data to the computer, which can be prepared up to 1000 Hz.
Another scale that may be important for consumers and serious players is IPS or Inhes Per Second (again in an inch).Pixart 3389 can track up to 400 inches per second.This means, if you move the mouse faster than 400 inches per second, or more than 10 m / s, you will lose some tracking.
My office is approximately two meters long.I will have to move this mouse through my office in less than 0.2 seconds to experience tracking and escape.While this may seem ridiculous, it is not exactly unrealistic as it may seem.This does not mean that it is customary for people to use the space of their office completely in parts of a second, but the rapid changes in the mouse track may have a great acceleration, even if for a few hundred seconds.For serious players, this is a competitive advantage.
Now to other aspects of performance, the Zepher Pro, the fan is clear and direct.It only works!The effect of cooling is very clear, especially in the palm area.It is actually effective enough that you may want to disrupt it sometimes.It would be great if the intensity of the fan is prepared.
The front of the mouse in general loses cooling due to the lack of a hole in the basic buttons.But cooling is very functional and can be feeling 3 cm to 4 cm from the mouse itself.
Marsback was forced to replace the unit that has been disrupted.The failure mode was the great erosion, and the sensor was tracked most of the time, but with constant erosion and trembling.Given that this product uses the same sensor in Razer, Logitech, Cooler Master and Hyperx products, I think it is summarized in the chance of clouds.Nevertheless, I think detecting important details.I did not face any problems with the alternative unit.
Zephyr Pro is very typical for peripheral games programs.She has that elegant, compulsory black aesthetic that we all expect, and it is not a problem.But what is the problem is the fact that you need to run the program as an official.
This, for me, it seems unnecessary and perhaps not safe.Only things that require administrative privileges to be run as an official.I think the application needs concessions to change the COM ports to form the mouse through a serial connection.
The program allows you to form the procedures that are implemented when you press any of the buttons.There are more than fifty different options for the procedure that can be customized for the buttons, so they are somewhat flexible for most users, but they support even macro units, which means that they can be very strong.These tasks can be saved as definition files for quick download and switch later.
There is a variety of performance modification options, the most prominent of which are DPI rates and investigation.However, you can also change the mouse speed, scroll speed, double click speed, click response time, take off and XY sync.As with procedures appointments, they can also be saved in composition files.
Lighting composition is something I found somewhat weak given the possibilities.There are seven patterns of pre -forming lighting, including fixed colors and broken lighting, so there are only five animated fees.Various patterns have options related to them, but composition is somewhat frustrated.
Light color cannot be customized in the scroll wheel.At least not directly.The slide wheel light color indicates a DPI mode.When configuring DPI settings, the associated color can also be configured.
But this means that after filling the seven DPI composition holes, most colors are likely to conflict with any carefully striped color system.You can overcome this by creating all situations to use the same color and perhaps all situations that have the same DPI, but this contradicts the purpose of the ability to customize these options.
Despite the possibility of a contrast to the color scheme, it is a great solution to indicate the current DPI setting.However, I think it will be more convenient if the scrolling wheel is temporarily associated while moving via DPI mode using the DPI button, then return to the composed color and animated color scheme.
Finally, the program supports the creation of Macro Units.These macro units support the entry of the keyboard.Macro units can be imported and exported, such as identification files, which allows you to share them with your friends.Interestingly, the export also supports the encryption of the resulting file.Files reserved to have an extension.mbin.The file is not subject to text editing, so you will have to import it again to the Marsback program to make any additional modification.
In general, MarsBack Zephyr Pro is a very enjoyable experience.Performance characteristics equally with all the mice that you used in the same price range.It is, in my opinion, a very comfortable terminal, with or without the fan, most people should be able to adapt to it.
Even if you are not the type that you find yourself losing control of your online matches, Zephyr Pro will make a good backup copy of LAN as you do not worry about cleaning the device lending.
I recommend Zepher Pro to anyone looking for a decent mouse that fits the description.I will continue to enjoy it on Cooler Master Master Keys Lite and even on Razer Deathahat Essential.
